CLEANING OR DESLUDGING A CRUDE OIL TANK OR PITS IS ONE THING

BUT WHAT DO YOU DO WITH ALL THE SLUDGE

HAVE THE ANSWER WITH THE

PHORS10 TOTAL AUTOMATIC TANK CLEANING

& OIL RECOVERY SYSTEM THAT DOES IT ALL

AND WITH NO MAN ENTRY INTO A TANK

PHORS10 Image result for + <img src="crude%20oil%20sludge.jpg" alt="crude oil sludge pit">   Image result for =   Image result for =

 

PHORS 10 recovers the good oil from the sludge

PRO-LINE HYDRALINK TANKSWEEPS OR MANWAY CANNON SYSTEMS

CAN BE USED WITH THE PHORS 10 OIL RECOVERY SYSTEM 

Automatic Non Man Entry Tank Cleaning and Oil Revovery at the same time

Recovered oil will contain 2% or less BS&W and the Sediment or solids remaining after processing

will have 100ppm or less of leachable hydrocarbons

Processing rate varies according to the incoming quality and desired out going quality but as a general rule

10m3 is a normal throughput giving good quality results

PHORS 10 TYPICAL FLOW DIAGRAM   PHORS 10 TYPICAL EQUIPMENT LAYOUT  PHORS10 ON SITE 
   

ABOUT PHORS 10                                                                                                           SPECIALLY DESIGNED AND BUILT CENTRIFUGE SPECIFICALLY FOR CRUDE OIL SLUDGES    

The PROLIN HYDRALINK PHORS 10 portable sludge treatment unit is specially designed and fabricated system, of heavy duty, welded construction built around a 40' ISO hi-cube container box size.  The unit is fitted with standard twist locks and carries CSC plating for easy transportation. The centrifuge unit is supplied with its own purpose built support frame for safe operation and maintenance.

All electric motors and the system control panel  are rated EExd for Zone 1 refinery use. 

The PHORS 10 unit includes:

  • Heated pre treatment system with heavy duty, electric drive agitator for effective recirculation and re-suspension of solids in the sludge. Pre treatment tank has large external level indicator and high/low level alarms.
  • electric drive agitor for effective recirculation and re-suspension of solids in the sludge. Pre treatment tank has large external level indicator and high/low level alarms
  • Heavy duty, variable speed electric drive Centrifuge Feed Pumps. Main pump plus standby pump hard piped and wired into control system for continuous working.
  • Chemical Dosing System for improved performance and treatment of a wide range of waste oil sludge materials.  System includes twin half metre mixing and holding tanks with electric drive agitators and variable speed dosing pump.
  • Purpose built, heavy duty two phase Centrifuge to remove solids from the pre treated sludge and reclaim good quality oil suitable for pumping directly back to refinery storage facilities. 
  • Centrifuge system includes comprehensive control and alarm systems wired into system Control Panel
  • Centrifuge supplied complete with sediment and recovered oil chutes.
  • Purpose built centrifuge support frame designed for fast and simple site erection and which allows safe access around centrifuge for routine maintenance.
  • Electrically driven VISCOTHERM Power Pack for centrifuge drive and control.  Unit wired in to centrifuge control panel for safe and simple operation.
  • Recovered Oil Holding Tank (3.5m3) with large external level indicator and high/low level alarms.
  • Heavy duty, variable speed electric drive Sludge Feed Pump for sludge feed to PHORS 10 Unit
  • Heavy duty, variable speed electric drive Recovered Oil  Pump to transfer reclaimed oil into adjacent storage tanks or directly back into the refinery system
  • All equipment is wired into main Control Panel for safe and simple operation.  All feed pumps stop/start wired into integrated high/low level alarms.
  • System designed for on site operation in remote locations and has all maintenance items easily accessible.
  • Comprehensive operating and maintenance manuals.
  • Dimensions and Weights:

                        13.411m long x 2.438m wide x 2.895m high

                        Weight: Dry:  13,000 Kg

                        Operating:     33,000 Kg

         Utilities Required:

·         Steam: 4,500 Kg/Hour at 10 bar max

·      Electricity: 415 V 3 phase 300 KVA

·         Water: Typical fire hydrant supply for chemical dosing system and wash down

Typical crude oil sludge processing rate 10-25³/hour depending on sludge quality

Recovered oil will contain2% or less BS&W and the Sediment or solids remaining after processing will have 100ppm or less of leachable hydrocarbons

                   

email tony@pro-linehydralink.com

  
USING THE PHORS 10 WITH PROLINE HYDRALINK TANKSWEEPS

For more information about Tanksweeps www.tanksweep.com

Home    Other Systems     About    Contact

All rights reserved copyright © 2017 - 2019 by PRO-LINE HYDRALINK   Webmaster tbfrance@gmail.com